Check if you've received all boxes without any damages. If so, you’re good to go! Remember to always assemble furniture on a blanket, carpet or on the cardboard you got from us.

Take the first two legs and screw a pin into the hole in the middle.

Place the tabletop in a way that the screw holes are directed upwards. Place the legs along the shorter side of the tabletop. Make sure that the screw holes in both components align with each other. Screw the legs to the tabletop using 4 screws and the Allen key. Do not tighten the screws all the way - leave some room for flexibility, and tighten the screws firmly only when all the parts are connected.

Take the long bar and attach it to the pin. Use the hammer to drive the bar into the legs. Use the Allen key to tighten the two parts together. While doing it, push the legs against the bar.

Take the second leg and screw a pin into the hole in the middle.

Use the hammer secured with a cloth to drive the legs into the long bar. Use the Allen key to tighten the two parts together. While doing it, push the legs against the bar.

Screw the legs to the tabletop using 4 screws and the Allen key. Screw the bar to the tabletop using 4 screws and the Allen key. Do not tighten the screws all the way - leave some room for flexibility, and tighten the screws firmly only when all the parts are connected.

Take one of the shorter bars and place it as shown in the picture. Screw it to the tabletop using 3 screws and the Allen key. Do not tighten the screws all the way - leave some room for flexibility, and tighten the screws firmly only when all the parts are connected. Repeat the previous step using the remaining bars.

Well done! Your Yami Table is now ready to use! To avoid damages, always make sure to lift the furniture when moving it.