Check if you’ve received the box without any damages. If so, you’re good to go! It’s suggested to assemble the inverted chair on an elevated surface, e.g. on a table top.

Connect the legs in the middle as pictured.

Place the seat onto the legs and insert six M6x65 screws (long) into the holes. Make sure all screws align with the holes in the seat, then gently tighten them by hand.

When all screws are placed correctly, tightly fasten the parts together using the Allen key.

Use M6x35 screw (middle length) for the hole in the middle. Screw the parts together using the Allen key.

Connect the backrest to the frame using four M6x15 screws (short) and the Allen key.

If the chair seems wobbly, regulate the leg height with adjustable feet.