Check if you’ve received the box without any damages. If so, you’re good to go!

Take the shelf and insert 3 dowels into the holes, make sure all dowels are positioned correctly, as shown in the picture.

Very carefully place the beam on the dowels. Ensure that the element is evenly positioned and make contact with the shelf.

Insert 2 dowels into the holes, make sure all dowels are positioned correctly, as shown in the picture.

Take the legs, insert 3 pins in each leg and twist them. Make sure all pins are positioned correctly, as shown in the picture.

Very carefully place the shelf and beam on the pins. Ensure that the elements are evenly positioned and make contact with the leg.

Very carefully place second leg that the pins fit into the holes in the rest of the elements. Ensure that the leg is evenly positioned and make contact with the elements.

Carefully rotate the table. Insert 6 screws into the holes under the shelf and beam. Screw them in tightly using a screwdriver.

Place four felt pads on the corners of the legs and one in the middle of the beam. Ensure that each pad is placed parallel.

Carefully set the table upright. Insert 4 bumpers into the holes.

Very carefully place the glass top on the bumpers. Ensure that the top is placed evenly.