Check if you’ve received your box without any damages. If so, you’re good to go! Remember to assemble on a blanket, carpet or to use our cardboard.

Screw 4 pins into the right holes on the left and right walls (see the picture), and insert 4 dowels.

Mount the top part. Please note that it’s slightly longer than the bottom part. Screw the parts together, ensuring that the arrows on the screw nuts are oriented as shown in the picture.

Repeat the previous step with the bottom part.

Insert the dowels into the 4 holes in the back part. Slide the part in until it’s even with the rest of the assembly.

Mount the wall: screw the parts together, ensuring that the arrows on the screw nuts are oriented as shown in the picture.

Depending on the desired direction of opening, install the mounting plates on the left or right side of the furniture using 4 x M6x10 pins. Please note that the arrows on the mounting plates must point outside of the furniture. Put the end caps into the opposite holes.

Insert the shelf supporting pins into the 4 holes and slide in the shelf.

Mount the hinges onto the front doors: simply push the hinges into the holes and screw them with a screwdriver.

Mount the doors by pressing the hinges together until they click. Adjust the doors’ position with a screwdriver as shown in the picture. Enjoy your new piece of furniture! To avoid damages, always make sure to lift the furniture when moving it.