Let's get started!

Check if you've received all boxes without any damages. If so, you’re good to go! Remember to assemble on a blanket, carpet or to use our cardboard.

Start with the frame of the Base Module.

Read the markings on the Connecting Tubes.

Mount the Connecting Tubes into the frame by inserting them inside the legs.

Now mount the Armrests and Backrests. Start with inserting the screws at an angle into one Tube from the outside of the furniture, then into the other. When the screws are in the holes of both Tubes, push the Armrest or Backrest down firmly until they click.

After the Armrests and Backrests are mounted, find the screws in all the legs and use the Allen key to screw the Connecting Tubes firmly to the frame.

Now you can put and press the Seating Cushion into the frame until it sits well.

Take the Armrest and Backrest Cushions. Notice that they are of a different length. Place them respectively.

Plug the open tubes of the frames using the plastic Caps. If you bought a Side Table, insert it into the desired leg of the sofa.

Let's get started!

Check if you've received all boxes without any damages. If so, you’re good to go! Remember to assemble on a blanket, carpet or to use our cardboard.

After unpacking the boxes, unscrew the Connectors from the Plus Modules using the Allen key. The screws and Connectors will be used later.

Connect the Base Module with the first Plus Module using the Connectors. Screw them using the Allen key and the screws from the previous step. Repeat the previous step to the point when all Plus Modules are used. To create a corner sofa, connect 2 Plus Modules with the Base Module.

In sofas with at least 3 seatings, one extra 1L Tube is added if a change of setting is needed.

Mount the Connecting Tubes into the frame by inserting them inside the legs.

Now mount the Armrests and Backrests. Start with inserting the screws at an angle into one Tube from the outside of the furniture, then into the other. Push the Armrest or Backrest down firmly until they click.

After the Armrests and Backrests are mounted, find the screws in all the legs and use the Allen Key to screw the Connecting Tubes firmly to the frame.

Now you can put and press the Seating Cushions into the frame until they sit well.

Place the cushions respectively.

For corner sofa configuration use 1 Armrest and 1 Backrest Cushion for the corner module.

Plug the open tubes of the frames using the plastic Caps. If you bought a Side Table, insert it into the desired leg of the sofa

Toom Modular Sofa is ready to use! If you want to relocate it, divide it into the smaller modules. To avoid damage of furniture, always lift it above the floor while moving it.