Check if the box you’ve received is undamaged. If so, you’re good to go! Remember to always assemble furniture on a blanket, carpet or on the cardboard you got from us.

Place 6 connectors in the holes located in the wall and back parts. Notice that there’s a smaller hole in each connector that matches the holes in the shelf parts - these holes must align as pictured.

Connect the wall with the bottom part, then slide it until the edges are even.

Connect the back with the bottom part and mount it by screwing the 2 connectors by 180°.

Mount the top part the same way as in the previous step. Connect it to the wall by screwing the 2 connectors by 180°.

Screw the 2 remaining connectors located in the back.

Enjoy your new piece of furniture! To mount Tann Shelf to the wall, follow the assembly sheet included in the box.