Check if you've received all 4 boxes without any damages. If so, you’re good to go! Remember to assemble on a blanket, carpet or to use our cardboard.

Place part S1 in a position that veneer part is facing up. Screw in the threaded pins.

Mount the legs by screwing them tightly.

Flip the S1 part and put it on its' legs.

During the next steps use the hammer (to place the walls in correct position) and the screwdriver (to adjust the screws if necessary). To avoid damaging the furniture, please remember to secure the hammer with a cloth.

Place the S3, S4 and S5 parts one by one, in a way that the screws hide in connectors’ holes. Pull them towards the front until it’s even with the S1 part.

Place the S2 part in a way that screws hides in connectors' holes. Pull it until it's even with the walls.

Stick the dowels into the bottom part. Then mount the S6 parts at an angle starting from the bottom. Push the pins as presented in the detail and put the S6 parts in place.

Slide in the shelves.

Mount hinges on both front doors. Simply push the hinge into the holes and lock.

Mount the front doors of the sideboard. Press the hingers together until they click.

To avoid damage of furniture, always lift it above the floor while moving it. Do not lift by the top.