Check if you’ve received all 3 boxes without any damages. If so, you’re good to go! Remember to assemble on a blanket, carpet or to use our cardboard.

Check if you've received the box without any damages. If so, you’re good to go! Remember to assemble on a blanket, carpet or to use our cardboard.

Slide the handles into the front part. Mount the headboard to the handles.

Screw 2 pins into the short side of the frame — into the holes at both sides.

Put the dowels into the long sides of the frame. Attach them in a way that the pins hide in corresponding holes. Screw the parts tightly using the Allen key.

Screw 2 pins into the remaining part of the frame.

Attach it to the frame in a way that the pins hide in corresponding holes. Screw the parts tightly using the Allen key.

Mount the corner legs to the frame as pictured. Use four M6x12 (short) screws and the Allen key for each leg.

Screw the legs into the two supporting rails using the M8x20 (long) screws and the Allen key.

Mount the longer supporting rail using four M6x12 (short) screws and the Allen key.

Mount the shorter supporting rail as pictured, using four M6x12 (short) screws and the Allen key. In the middle use screw nuts.

Place the slats and mattress inside the frame.