Check that you have received all 3 boxes and that all parts are included and undamaged. If so, you’re good to go! Always assemble the furniture on a blanket, carpet, or the cardboard packaging provided.

Take element S1 and insert 9 dowels into the designated holes.

Attach S2. Align the holes with the dowels, make sure the fittings are properly positioned, and tighten them using a screwdriver.

Attach the 2 × S3 element. Align the holes with the dowels, make sure the fittings are properly positioned, and tighten them using a screwdriver.

Carefully turn the structure over.

Attach the elements: S4, 2 × S5, and S6. Align the protruding pins with the holes and slide the panels towards the back.

Attach 3 × S13 element. Slide the fittings onto the pins protruding from the side panels.

Carefully turn the structure over.

Attach the 3 × S8 element. Slide the fittings onto the pins protruding from S1 and each of S13 elements.

Insert the dowels into the designated holes along the edges of the panels.

Attach the S7 element. Align the holes with the dowels, make sure the fittings are properly positioned, and tighten them using a screwdriver.

Start assembling the drawer. Take element S9 and slide two S10 elements onto the pins protruding from its sides. Align the protruding pins with the holes and slide the elements towards the back.

Take element S11, slide it onto the protruding pins, and push it down.

Take element S12, slide it onto the protruding pins, and push it down. Assemble the remaining two drawers in the same way by repeating steps 12 to 14.

Install the drawers. Pull the runners out as far as possible and place the drawer evenly on both of them. Push the drawer in until you hear a click and its front is aligned with the cabinet.