Check if you’ve received both boxes without any damages. If so, you’re good to go! Remember to assemble on top of the cardboard packaging to protect the floor from damage.

Start with R3. Make sure the cable grommet is positioned on the right side. Place R3 on a raised surface — you can use packaging elements.

Insert 8 wooden dowels into R3.

Place R1 onto R3. Ask the other person to hold R1 in place.

Insert 4 metal cam locks into R1, making sure the arrow on each cam lock points outwards.

Insert 4 wooden dowels into R1.

Mount R6 and R7 and secure each of them at the 2 connection points. Tighten the metal cam locks until you feel resistance.

Insert 6 wooden dowels into the bottom edges of R6 and R7.

Place R2 onto the unit. Ask the other person to hold it in place.

Insert 4 metal cam locks into R2, making sure the arrow on each cam lock points outwards.

Insert 4 wooden dowels into R4 and R5.

Screw 4 metal cam bolts into R4 and R5.

Place R4 and R5 onto the unit and screw each of them at the 4 connection points. Tighten the metal cam locks until you feel resistance.

Insert 2 larger wooden dowels (Ø10 mm) into R2.

Mount R9 and screw it at the 2 connection points. Tighten the metal cam locks until you feel resistance.

With the help of the other person, carefully lift the TV stand into an upright position. Do not pivot it on its edges, as this may cause damage. Before installing the doors, make sure the TV stand is already positioned in its final location. Use a spirit level to check that it is perfectly level, as this will affect the final alignment and adjustment of the fronts.

Insert the shelf supports into the side panels, then slide R8 into place.

Install the hinges on the doors.

Install the doors and adjust their position and alignment using a screwdriver if needed. Done! Remember to always lift the TV stand when moving it — never drag it across the floor.