Check if you've received all 2 boxes without any damages. If so, you’re good to go! Remember to assemble on a blanket, carpet or to use our cardboard.

Place and screw the leg tightly using 3 M6x16 screws and the Allen key. Mount the remaining legs.

Prepare the walls. Insert the pins into the holes, then push the parts towards the front until you hear a click.

Place the top. Insert the pins into the holes, then push the parts towards the front until you hear a click.

Turn the assembled structure over.

Install the two H9 parts. Insert the dowels into the lower section and slide the parts into place at an angle. Press in the pins located at the top and position each part correctly.

Place the sliding door in the rear rail.

Place the ornamented glass door in the front rail.

Insert 4 × shelf support pins into the holes. Slide in the shelf.