Check if you've received all 2 boxes without any damages. If so, you’re good to go! Remember to assemble on a blanket, carpet or to use our cardboard.

Prepare the walls the MTM5 part (Top). Insert the pins into the holes, then push the parts towards the front until you hear a click.

Place the MTM1 part (Bottom). Insert the pins into the holes, then push the parts towards the front until you hear a click.

Turn the assembled structure over.

Install the MTM6 part. Insert the dowels into the lower section and slide the parts into place at an angle. Press in the pins located at the top and position each part correctly.

Place and screw legs tightly using M6x16 screws and the Allen key.

Lift the TV Stand, rotate and then put it gently on its legs.

Insert 4 × shelf support pins into the holes. Slide in the shelf.

Place the sliding door in the rear rail.

Place the ornamented glass door in the front rail.

Well done! Your Met Mini TV Stand is now ready to use! To avoid damages, always make sure to lift the furniture when moving it.