Check if you’ve received all 3 boxes without any damages. If so, you’re good to go! Remember to always assemble furniture on a blanket, carpet or on the cardboard you got from us.

Slide the first leg over the MM1 part in a way shown in the picture. Screw it tightly using a screw and the Allen key. Tighten up the two remaining screws. Mount the remaining legs.

During the next steps use the hammer (to place the walls in correct position) and the screwdriver (to adjust the screws if necessary). To avoid damaging the furniture, please remember to secure the hammer with a cloth.

Mount the MM4 part so that the screws are hidden in the connectors' holes. Pull it towards the front so it stays stable.

Repeat the previous step using the MM3 part.

Mount the MM6 part. Pull the part from right to the left so it stays stable. Remember that the screws must meet the connectors' holes.

Mount the MM5 part. Slide it towards the front so it stays stable.

Mount the MM2 part. Make sure all the wooden dowels fit in the holes, then put the screws in the connectors' holes.

Slide the MM2 part towards the front until it's even with the sides.

Slide the MM7 part.

Place the sliding door in the rear rail.

Place the ornamented glass door in the front rail.

Well done! Your Met Mini TV Stand is now ready to use! To avoid damages, always make sure to lift the furniture when moving it.