Check if you’ve received all boxes without any damages. If so, you’re good to go! Remember to always assemble furniture on a blanket, carpet or on the cardboard you got from us.

Connect parts H2 and H3 as shown in the illustration. Insert the pins into the holes, then slide the parts to the right until you hear a click. Repeat this step with the second set of H2 and H3 parts.

Connect parts H4, H5 and H6 as shown in the illustration. Insert the pins into the holes, then push the parts down until you hear a click.

Next, attach the H2 and H3 parts prepared in step 2. Connect them as shown in the illustration. Insert the pins into the holes, then push the parts down until you hear a click.

Install parts H7 and H8 as shown in the illustration. Insert the pins into the holes, then push the parts down until you hear a click.

Turn the assembled structure over.

Install the two H9 parts. Insert the dowels into the upper section and slide the parts into place at an angle. Press in the pins located at the bottom and position each part correctly.

Connect parts H10, H11 and H12 as shown in the illustration. Insert the pins into the holes, then push the parts down until you hear a click.

Turn the assembled structure over.

Install part H13 as shown in the illustration. Insert the pins into the holes, then push the part down until you hear a click.

Install part H14 as shown in the illustration. Insert the pins into the holes, then push the part down until you hear a click.

Pull the sliders as far as possible and place the drawer evenly on both of them. Push it inside till you hear a click and the front is fully hidden. To remove the drawer from slides just lay your fingers on the locking device and pull it.

Mount the 2 hinges on the right place of each H15 part.

Mount the doors by pressing the hinges together until they click.

Adjust the doors’ position with a screwdriver as shown in the picture. Enjoy your new piece of furniture! To avoid damages, always make sure to lift the furniture when moving it.