Check if you’ve received all boxes without any damages. If so, you’re good to go! Remember to always assemble furniture on a blanket, carpet or on the cardboard you got from us.

Connect the parts H5 and H8 and screw them together using a screwdriver.

Connect the parts H1 and H4 and screw them together in the same way.

Connect the parts H1 and H5 as pictured. Screw them together tightly.

Stick the dowels into the H6. Slide the part in. The dowel must hide in the hole.

Mount the H2 part. Screw the parts together as pictured.

Mount the second H4 part by screwing it as pictured.

Mount the second H5 part in the same way as above.

Stick the dowels into the H6. Slide the part in. The dowel must hide in the hole.

Mount the second H3 part and screw the parts together as pictured.

Stick the dowels into the DH4. Attach the parts DH2 and DH3 to the DH4 part. The dowel must hide in the hole.

Mount the DH5 part as pictured: the screws must hide in the connectors’ holes, then slided down.

Mount the DH1 part and screw it to the drawer.

Pull the sliders as far as possible and place the drawer evenly on both of them. Push it inside till you hear a click and the front is fully hidden. To remove the drawer from slides just lay your fingers on the locking device and pull it.

Mount the 2 hinges on the right place of each H7 part.

Mount the doors by pressing the hinges together until they click.

Adjust the doors’ position with a screwdriver as shown in the picture. Enjoy your new piece of furniture! To avoid damages, always make sure to lift the furniture when moving it.