Check if you've received all 2 boxes without any damages. If so, you’re good to go! Remember to always assemble furniture on a blanket, carpet or on the cardboard you got from us.

Connect two parts of the table top. Place two legs in the middle of the table top in a way the screw holes align.

Use short screws and the Allen key to tightly screw the legs to the table top.

Take two remaining legs and screw the pins into the holes at their narrow sides.

On the support bar, put four connectors in the holes on the side. The arrow on the connector must be directed as pictured.

Connect the legs with the support bar by putting the pins inside the matching holes. Tightly screw the parts together using a screwdriver and the connector.

Place the legs and the support bar on the table top in a way that all the screw holes align. Place four long screws in the holes in the support beam and screw them using the Allen key.

Use short screws and the Allen key to tightly screw the legs to the table top.

Enjoy your new piece of furniture! To avoid damages, always make sure to lift the furniture when moving it.