Check if you've received all 5 boxes without any damages. If so, you’re good to go! Remember to assemble on a blanket, carpet or to use our cardboard.

Place the B1 part with the screw holes up. Screw threaded rod into the middle socket. Then screw the middle leg onto it.

Place the legs on the B1 part in a way that the holes meet the sockets in the bottom. Tighten them using attached screws and Allen key.

During the next steps use the hammer (to place the walls in correct position) and the screwdriver (to adjust the screws if necessary). To avoid damaging the furniture, please remember to secure the hammer with a cloth.

Flip the B1 part. Mount all the walls one by one by placing them in a way that the screws in the bottom hide in the connectors' holes, then pull it until it's even with the B1 part.

Place the B2 part in a way that screws hides in connectors' holes. Pull it until it's even with the walls.

Stick the dowels into the bottom part. Then mount the B8 parts at an angle starting from the bottom. Push the pins as presented in the detail and put the B8 parts in place.

Place the B7 part on the clips. Push it to the bottom until clips are even with the shelf.

Slide the B12 parts in.

Mount the hinges onto the front doors. Simply push the hinge into the holes and lock.

Mount the doors by pressing the hinges together until they click.

To avoid damage of furniture, always lift it above the floor while moving it.